Smoke Alarm Installation

Smoke Alarms installed in homes across Perth's Northern Suburbs. Quality Workmanship at affordable prices.

Smoke Alarm Installed

$170*

  • Photo Electric
  • Quality Brand
  • Guaranteed workmanship
Book Today!

* Prices Subject to Confirmation

smoke alarms installed
smoke alarm installed by electrician

Smoke Alarm Installation

A new Australian Standard applies from 1 May 2017 to new smoke alarm installations in residential dwellings.
Importantly, this includes new smoke alarms installed in dwellings subject to transfer of ownership, lease or hire and replacement alarms in dwellings leased or hired. This does not trigger a requirement to replace existing compliant alarms.

The Building Commission has released an industry bulletin setting out the requirements for smoke alarm installations in new dwellings and existing dwellings.

Smoke alarms are compliant when they:

  • are in accordance with the Building Code of Australia (BCA) applicable at the time of the installation of the alarm;
  • are not more than 10 years old at the time of the transfer of ownership, or making the dwelling available for rent or hire; and are in working order; and are permanently connected to consumer mains power (hard-wired) or if the use of a battery powered smoke alarm has been approved under the Building Regulations 2012, the alarm has a 10-year life battery that cannot be removed.
  • The new Australian Standard can be identified on smoke alarms by looking for an AS 3786:2014 marking. The marking supersedes the 1993 AS3786:1993 marking.

A licensed electrician is required to either connect or disconnect a smoke alarm to the mains power supply.

Further information about smoke alarms is available from the Building Commission factsheet Smoke alarm laws.

Mains powered smoke alarms

DFES recommends every home should have mains powered smoke alarms. A mains powered smoke alarm is one which is wired direct to a 240 volt AC power supply or to a 12/24 volt DC system powered by a 240 volt supply.



It is important to note that all mains powered smoke alarms must be installed by a registered electrician, and must comply with Australian Standard 3786 and carry the Australian Standards or the ActivFire labels.

If your not sure or need a check of your smoke alarm you can book an inspection or replacement by calling Alan on 0419 045 152 or using the contact form in the side column.



Book your smoke alarm installation with an experienced local electrician. Being a licensed electrician, Alan can install smoke alarm, giving you peace of mind and safety coverage to your home, protecting you and your family . Contact ARJ ELectrical Services for further information about Smoke Alarm installation costs.

Good value for money. Happy to recommend!

Alan did a good job

Cleo from Banksia Grove, WA

5 star

Cuan Stauch

He is the electrician I always call

Alan came to my parents’

Esther

Excellent Service

Thanks for your excellent

Pat
Girrawheen

Efficient

Efficient and carried out the

Carol
Doubleview

Cannot recommend highly enough

ARJ Electrical was about the

Cathy O'Brien

Even my super fussy husband was impressed.

Alan was on time and

Rachel from Joondalup

Alan was very professional & cleaned up.

We had a power point

Leeanne from Currambine

Very neat & tidy job at a reasonable price

“Alan did a very neat

Greg from Aveley, WA

Great job at a fair price

We have used Alan twice

Stephen Briggs

Works perfectly and looks much better.

I have used Alan for

Mary from Wanneroo

Great Electrician

Alan came in and upgraded

Roy Froggatt

Good customer services

Good customer services… on time

Thomos A.